Alternative Methods of Yttria Deposition For Semiconductor Applications
A systematic Study and characterization of advanced Corrosion Resistance Materials and their
Applications for Plasma Etching Processes in Semiconductor Wafer Fabrication
Coatings Deposited Using a Valve-less Detonation System
Detonation (D-Gun) Spraying is one of the oldest yet least utilized thermal spray technologies in spite of these coatings being known to be harder and better adhered then those applied via plasma and even HVOF methods.
The role of thermal spray in medical applications
Traditionally, thermal spray in the medical industry has been linked to the spraying of either titanium or hydroxyapatite on dental, spinal or limb implants.
SMS Fall Newsletter
SMS conducts a range of additional processes, not mentioned above, including vacuum and controlled atmospheric (CAPS) plasma spraying, porous titanium coatings on metallic and PEEK substrates
Influence of Process Variables on the Microstructure of Low Pressure
Low Pressure Plasma Spraying (LPPS) is a well established method of applying dense, adherent refractory alloys as protective coatings. However, little work has been done using LPPS to form coatings and free standing forms of tungsten with microstructures and densities approaching that of traditional powder consolidation techniques such as sinter forging.
Interdiffusion Coefficients in the Zeta Phase of the Fe-Al System
Interdiffusion is an important mechanism in the formation and degradation of coatins on iron-based superalloys.
Effect of Ternary Gas Mixtures on the Microstructure of Refractory Metals and Alloys Deposited by Low Pressure Plasma Spraying
To overcome the problem of depositing dense refractory coatings, a study was undertaken on the effect of using three plasma gases simultaneously when depositing tungsten and tungsten alloys utilizing Low Pressure Plasma Spraying (LPPS).
Novel Hybrid Coatings
In order to address deficiencies in thermal spray coatings applied using air plasma spraying (APS) and high velocity oxygen fuel (HVOF), namely, adhesion, cohesion, porosity and line of sight limitations, novel hybrid coatings using post-thermal spray chemical vapor deposition via the pack cementation process were developed.
Thermal Spray Applications in the Solar Industry" Advanced Materials and Processes, May 2010
Thermal spray is viewed as mature technology in aerospace, petroleum and power generation industries, but is not as well accepted as a viable processing technique in the semiconductor and solar cell manufacturing sectors.